No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show performance lun_priority

show performance lun_priority

Function

The show performance lun_priority command is used to query the performance statistics of LUNs with a specific I/O priority. If you want to analyze the real-time performance statistics of LUNs with a specific I/O priority, run this command.

Format

show performance lun_priority io_priority=? controller_id=?

show performance lun_priority io_priority=? controller_id_list=?

Parameters

Parameter

Description

Value

controller_id=?

Owning controller ID of LUNs.

To obtain the value, run the "show controller general" command.

io_priority=?

I/O priority of LUNs.

The value can be:

  • "Low": The I/O priority is low.
  • "Middle": The I/O priority is medium.
  • "High": The I/O priority is high.

controller_id_list=?

List of owning controller IDs of LUNs.

To obtain the value, run the "show controller general" command. If multiple owning controllers of LUNs need to be added, separate controller IDs with commas (,).

Level

Guest

Usage Guidelines

  • After this command is executed, performance data categories are displayed. You can enter the serial number before a category and press "Enter" to view the category of data. You can enter multiple serial numbers and use commas (,) to separate them.
  • Performance statistics will be updated in real time.
  • Typing "q" on the command line interface (CLI) exits the performance statistics display.

Example

Query the performance statistics of LUNs whose owning controller is "0A" and I/O priority is "Low".

admin:/>show performance lun_priority io_priority=Low controller_id=0A 
0.Bandwidth(MB/s) / Block Bandwidth(MB/s) 1.Throughput(IOPS)(IO/s)                      
2.Read Bandwidth(MB/s)                       3.Read Throughput(IOPS)(IO/s)                 
4.Write Bandwidth(MB/s)                      5.Write Throughput(IOPS)(IO/s)                
6.Average I/O Latency(ms)                    7.Average Read I/O Latency(ms)                
8.Average Write I/O Latency(ms)              9.Average I/O Latency(us)                     
10.Average Read I/O Latency(us)              11.Average Write I/O Latency(us)  
Input item(s) number separated by comma:0 
  Bandwidth(MB/s) / Block Bandwidth(MB/s) : 0

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181601

Views: 312368

Downloads: 39

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next