No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete share nfs

delete share nfs

Function

The delete share nfs command is used to delete an NFS share.

Format

delete share nfs share_id=?

Parameters

Parameter

Description

Value

share_id=? NFS share ID.

The value ranges from 1 to 18446744073709551615.

Level

Administrator

Usage Guidelines

  • In HyperMetro scenarios, if a failure message is prompted when deleting an NFS share, inconsistency between primary and secondary share permission lists may occur. You need to delete again until the operation succeeds to prevent inconsistency between primary and secondary share permission lists.

Example

  • Query NFS shares before the deletion.

    admin:/>show share nfs
    Share ID File System ID Local Path   CharSet   Lock Type  Alias
    -------- -------------- ----------   -------   ---------  ------
    1        1              /fs1/        UTF-8     Mandatory  /fs1
    2        2              /fs2/        UTF-8     Mandatory  /fs2
    3        4              /fs4/        UTF-8     Mandatory  /fs4
    4        5              /fs5/        UTF-8     Mandatory  /fs5
    5        6              /fs6/        UTF-8     Mandatory  /fs6
    6        0              /fs110/      UTF-8     Mandatory  /fs110
     
  • Delete an NFS share.

    admin:/>delete share nfs share_id=6
    WARNING: You are going to delete protocol share. This operation may interrupt share services or cause access exceptions.
    Suggestion: Before you perform this operation, determine whether the delete is necessary.
    Have you read warning message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)y
    Command executed successfully.
  • Query NFS shares after the deletion.

    admin:/>show share nfs
    Share ID File System ID Local Path   CharSet   Lock Type  Alias
    -------- -------------- ----------   -------   ---------  ------
    1        1              /fs1/        UTF-8     Mandatory  /fs1
    2        2              /fs2/        UTF-8     Mandatory  /fs2
    3        4              /fs4/        UTF-8     Mandatory  /fs4
    4        5              /fs5/        UTF-8     Mandatory  /fs5
    5        6              /fs6/        UTF-8     Mandatory  /fs6 
     

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 381307

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next