No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show hyper_metro_consistency_group general

show hyper_metro_consistency_group general


The show hyper_metro_consistency_group general command is used to query a HyperMetro consistency group.


show hyper_metro_consistency_group general [ consistency_group_id=? ]





consistency_group_id=? ID of the HyperMetro consistency group.

Run the "show hyper_metro_consistency_group general" command without parameters to obtain the value.



Usage Guidelines



  • Query HyperMetro consistency group "1".

    admin:/>show hyper_metro_consistency_group general consistency_group_id=1
    ID : 1
    Name: cg001
    Health Status : Normal
    Running Status : Normal
    Sync Rate : Middle
    Role : Preferred
    Recovery Policy : automatic
    Domain Id : 1
    Domain name : HCD001
    Description : cg
    Sync Direction : Local to Remote
    Isolation Switch : Open
    Isolation Threshold(ms) : 1000
    Active/Passive  :  Active
    Lock Mode : Optimistic Mode
    Write Secondary Timeout(s): 30
    DR Star ID       :  1a212d4a5e6b0000
    Local vStore ID  : 1
    Remote vStore ID : 1
  • Query all HyperMetro consistency groups in the device.

    admin:/>show hyper_metro_consistency_group general
    ID Name Health Status   Running Status    Sync Rate   Role     Sync Direction   Active/Passive    DR Star ID
    -- ---- --------------  --------------   ---------  --------  ---------------   --------------    -----------
    1  cg001 Normal         Normal           Middle     Preferred  Local to Remote   Active           1a212d4a5e6b0000     
    1  cg001 Normal         Normal           Middle     Preferred  Local to Remote   Active           1a212d4a5e6b0001

System Response

The following table describes the parameter meanings.




ID of the consistency group.


Name of the consistency group.

Health Status

Health status of the consistency group: Normal or Fault.

Running Status

Running status of the consistency group.

Sync Rate

Synchronization rate: High, Middle, Low or Highest.


Whether the end is Preferred end or Non-preferred end.

Domain Id

Domain ID.

Recovery Policy

Recovery policy.

Domain Name

Domain name.


Description of the HyperMetro consistency group.

Sync Direction

Synchronization direction: Local to Remote or Remote to Local.

Isolation Switch

Isolation switch: open or close.

Isolation Threshold(ms)

Isolation threshold.


Active or passive.

Lock Mode

Lock mode used by the HyperMetro pair: Optimistic Mode or Pessimistic Mode.

Write Secondary Timeout

Timeout period of I/O writing the secondary end (unit: second).

DR Star ID

DR Star ID.

Local vStore ID

Local vStore ID.

Remote vStore ID

Remote vStore ID.

Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 378188

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next