No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Command Reference
OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change smartqos_policy enabled

change smartqos_policy enabled

Function

The change smartqos_policy enabled command is used to enable or disable a specific SmartQoS policy.

Format

change smartqos_policy enabled smartqos_policy_id=? enabled=?

Parameters

Parameter

Description

Value

smartqos_policy_id=? ID of a SmartQoS policy.

To obtain the value, run "show smartqos_policy general".

enabled=? Switch for SmartQoS policies.

The value can be:

  • "yes": SmartQoS policies will be enabled.
  • "no": SmartQoS policies will be disabled.

Level

Administrator

Usage Guidelines

After creating a SmartQoS policy, you must run this command to enable the policy so that the settings associated with the policy can take effect.

Example

  • Enable SmartQoS policy "3".

    admin:/>change smartqos_policy enabled smartqos_policy_id=3 enabled=yes
    CAUTION: You are about to activate traffic control policy.
    This operation may affect the performance of storage objects.
    Suggestion: Before performing this operation, ensure that the preceding risk is acceptable and the traffic control policy is correctly configured.
    Do you wish to continue?(y/n)y
    Command executed successfully.
  • Disable SmartQoS policy "0".

    admin:/>change smartqos_policy enabled smartqos_policy_id=0 enabled=no
    CAUTION: You are about to deactivate traffic control policy.
    This operation may affect the performance of storage objects.
    Suggestion: Before performing this operation, ensure that the preceding risk is acceptable and the correct traffic control policy is selected.
    Do you wish to continue?(y/n)y
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-03-19

Document ID: EDOC1000181601

Views: 406316

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next