No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show ib_port count

show ib_port count


The show ib_port count command is used to calculate the number of IB ports.


show ib_port count [ parent_type=? ] [ logical_type=? ]





parent_type=? Parent type.

The value can be "controller", "expand_board", or "interface_module", where:

  • controller: indicates a controller.
  • expand_board: indicates an expansion board.
  • interface_module: indicates an interface module.
logical_type=? Logical port type.

The value can be "host", "exp", "mngt", "maintenance", "inner", "mngt_srv" , "maintenance_srv", "backup_mgr", "product_storage", "backup_storage", "eth_not_config", or "ip_scale_out", where:

  • host: indicates a host port.
  • exp: indicates an expansion port.
  • mngt: indicates a management network interface.
  • maintenance: indicates a maintenance port.
  • inner: indicates an internal port.
  • mngt_srv: indicates a port that can function as both a management port and a service port.
  • maintenance_srv: indicates a port that can function as both a maintenance port and a service port.
  • backup_mgr: indicates a backup management network interface.
  • product_storage: indicates a production storage network interface.
  • backup_storage: indicates a backup storage network interface.
  • eth_not_config: indicates a network interface for which no roles have been configured.
  • ip_scale_out: indicates a network interface for IP Scale-out.



Usage Guidelines

Parameters "parent_type" and "logical_type" are mutually exclusive.


Calculate the number of IB ports.

admin:/>show ib_port count
  IB Port Number : 2

System Response

The following table describes the parameter meanings.



IB Port Number

Number of IB ports.

Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 383173

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next