No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create hypervault_policy general

create hypervault_policy general


The create hypervault_policy general command is used to create a HyperVault policy.


create hypervault_policy general hypervault_id=? name=? type=? period=? [ days_of_week=? ] [ days_of_month=? ] [ interval_day=? ] [ frequency_hour=? ] [ frequency_minute=? ] [ start_time=? ] [ policy_status=? | copy_threshold=? ]





hypervault_id=? ID of the HyperVault object.

To obtain the value, run "show hypervault general" without parameters.

name=? Name of the HyperVault policy.

The value consists of 1 and 127 ASCII characters including digits, letters, underscores (_), hyphens (-), and periods (.).

type=? Type of the HyperVault policy.

The value is "local" or "remote", where:

  • "local": local HyperVault policy.
  • "remote": remote HyperVault policy.
period=? Indicates the policy of a schedule.

The value can be "daily", "weekly" or "monthly" , where,

  • daily: daily cycle.
  • weekly: weekly cycle.
  • monthly: monthly cycle.
days_of_week=? Days of a week.

The value can be any day or days from Monday to Sunday. This parameter can be specified when "period" is set to "weekly".

  • "mon": Monday.
  • "tue": Tuesday.
  • "wed": Wednesday.
  • "thu": Thursday.
  • "fri": Friday.
  • "sat": Saturday.
  • "sun": Sunday.
The value is set to all seven days of a week by default.
days_of_month=? Days of a month.

This parameter can be specified when "period" is set to "monthly". The value can be any day or days in a month. Number 1 to 31 indicates the corresponding 31 days in a month. The value is set to the 31 days of a month by default.

interval_day=? Interval of days.

This parameter can be specified when "period" is set to "daily". The value is the number of days the interval lasts and ranges between "1" and "7". The default value is "1".

frequency_hour=? Interval of hours.

The value is an integer between 0 and 23.

frequency_minute=? Interval of five minutes.

The value is an integer between 0 and 55.

start_time=? Policy execution time.

The value is a time between "00:00" and 23:59" in the format of "HH:MM".

copy_threshold=? Maximum threshold of copy count.

The value indicates the maximum number of copies and ranges between "3" and "256".

When "type" is set to "local", the default value is "5".

When "policy_type" is set to "remote", the default value is "35".

policy_status=? Policy status.

The value is "on" or "off", where:

  • "on": The policy is enabled.
  • "off": The policy is disabled.
The default value is "on".



Usage Guidelines



Create a policy for HyperVault "43435345" which will be implemented every Sunday on 22:00.

admin:/> create hypervault_policy general hypervault_id=43435345 name=weekly type=local period=weekly days_of_week=sun start_time=22:00 
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 377086

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next