No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show enclosure_max_depth general

show enclosure_max_depth general


The show enclosure_max_depth general command is used to query the detailed information about the cascading depth of disk enclosures in the system.


show enclosure_max_depth general





Usage Guidelines

Run the "show enclosure_max_depth general" command to query the cascading depth of disk enclosures in the system.


Query the cascading depth of disk enclosures.

 admin:/>show enclosure_max_depth general
  Enclosure Max Depth            : 4 
  Smart Disk Enclosure Max Depth : 2 

System Response

The following table describes the parameter meanings.



Enclosure Max Depth

Cascading depth of disk enclosures.

Smart Disk Enclosure Max Depth

Cascading depth of smart disk enclosures.

Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 376991

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next