No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Command Reference
OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show performance file

show performance file

Function

The show performance file command is used to query historical performance statistical files.

Format

show performance file [ controller=? ] [ from_time=? ] [ to_time=? ]

Parameters

Parameter

Description

Value

controller=? Controller ID, the value is in the format of "XA", "XB", "XC", "XD", where "X" is an integer ranging from 0 to 3, for example: "0A" , "1C".

To obtain the value, run "show controller general" without parameter.

from_time=? Start time to query performance files. All performance files updated later than this point in time will be displayed.
NOTE:
The value of from_time must be local time.

The value is in the format of "year-month-day/hour:minute:second", where:

  • "year": The year ranges from 2000 to 2035.
  • "month": The month ranges from 01 to 12.
  • "day": The day ranges from 01 to 31.
  • "hour": The hour ranges from 00 to 23.
  • "minute": The minute ranges from 00 to 59.
  • "second": The second ranges from 00 to 59.
to_time=? End time to query performance files. All performance files updated earlier than this point in time will be displayed.
NOTE:
The value of to_time must be local time.

The value is in the format of "year-month-day/hour:minute:second", where:

  • "year": The year ranges from 2000 to 2035.
  • "month": The month ranges from 01 to 12.
  • "day": The day ranges from 01 to 31.
  • "hour": The hour ranges from 00 to 23.
  • "minute": The minute ranges from 00 to 59.
  • "second": The second ranges from 00 to 59.

Level

Guest

Usage Guidelines

None

Example

Query historical performance statistical files. The command output varies with site conditions. In this instance, fields related to product models are represented by X.

admin:/>show performance file
  File Name                                                          Updated Time                   File Size   
  -----------------------------------------------------------------  -----------------------------  ----------  
  PerfData_XXXXX_SN_snystrw623h7d739dmc9_SP0_0_20150729194049.tgz    2015-07-29/19:42:09 UTC+08:00     2.000KB  
  PerfData_XXXXX_SN_snystrw623h7d739dmc9_SP0_0_20150729193655.tgz    2015-07-29/19:36:57 UTC+08:00     2.000KB  
  PerfData_XXXXX_SN_snystrw623h7d739dmc9_SP1_0_20150729194049.tgz    2015-07-29/19:42:09 UTC+08:00     1.000KB  
  PerfData_XXXXX_SN_snystrw623h7d739dmc9_SP1_0_20150729193655.tgz    2015-07-29/19:36:57 UTC+08:00     1.000KB

System Response

The following table describes the parameter meanings.

Parameter

Meaning

File Name

Name of the historical performance statistics file.

Updated Time

Time when the historical performance statistics file is updated.

File Size

Size of the historical performance statistics file.

Translation
Download
Updated: 2020-03-19

Document ID: EDOC1000181601

Views: 406317

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next