No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change ldap_server

change ldap_server


The change ldap_server command is used to modify the domain authentication server configurations of a vStore.


change ldap_server { mode=? }






vStore domain authentication mode.

The value can be "vstore" or "system", where:

  • "vstore": uses a domain authentication server configured in the vStore view.
  • "system": uses a domain authentication server configured in the system view.


Super administrator

Usage Guidelines

This operation will change the domain authentication mode of a vStore. After running this command, configure a domain authentication server specific to the mode and then perform domain user authentication.


Modify the domain authentication server configurations of a vStore and set the domain authentication mode to "system".

admin@vStore001:/>change ldap_server mode=system 
Command executed successfully.

System Response


Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 332442

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next