No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show performance smart_cache_partition

show performance smart_cache_partition

Function

The show performance smart_cache_partition command is used to query performance data of SmartCache partitions.

Format

show performance smart_cache_partition smart_cache_partition_id=?

show performance smart_cache_partition smart_cache_partition_id_list=?

Parameters

Parameter

Description

Value

smart_cache_partition_id=? ID of the SmartCache partition whose performance statistics will be collected.

To obtain the value, run "show smart_cache_partition general".

smart_cache_partition_id_list=? ID list of SmartCache partitions whose performance statistics will be collected.
  • To obtain the value, run "show smart_cache_partition general". You can add multiple SmartCache partition IDs separated by commas (,) or an ID range using hyphens(-), such as: 0,5-8.
  • A maximum of 50 IDs can be queried.

Level

Guest

Usage Guidelines

  • You will be prompted with optional performance statistics categories upon running this command. In this condition, type a number or multiple numbers (separated by commas) for the selected categories and press "Enter" to display the performance statistics for those categories.
  • Performance statistics will be updated in real time.
  • Typing "q" on the command line interface (CLI) exits the active performance statistics display.

Example

Query the cache capacity of SmartCache partition "0".

admin:/>show performance smart_cache_partition smart_cache_partition_id=0
0.Read SmartCache Hit Ratio(%)    1.Cached Capacity(KB)
                         
Input item(s) number separated by comma:1 

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 381001

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next