No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add smartqos_policy lun

add smartqos_policy lun


The add smartqos_policy lun command is used to add logical unit numbers (LUNs) to a SmartQoS policy.


add smartqos_policy lun smartqos_policy_id=? lun_id_list=?






ID of a SmartQoS policy.

To obtain the value, run "show smartqos_policy general".


ID list of the LUNs that you want to add.

To obtain the value, run "show lun general".

You can specify multiple LUN IDs separated by commas (,), or the ID range separated by hyphens (-), such as: 0,5-8.

A maximum of 64 LUNs can be added.



Usage Guidelines

After you add LUNs to a SmartQoS policy, the policy will be effective for the added LUNs.


Add LUNs "3", "4", and "5" to SmartQoS policy "0".

admin:/>add smartqos_policy lun smartqos_policy_id=0 lun_id_list=3,4,5 
CAUTION: You are about to add LUN into traffic control policy. 
This operation may affect LUN performance. 
Suggestion: Before performing this operation, ensure that the preceding risk is acceptable and the correct traffic control policy and LUN are selected. 
Do you wish to continue?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 327999

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next