No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change call_home general

change call_home general

Function

The change call_home general command is used to set the Call Home service.

Format

change call_home general switch=?

Parameters

Parameter

Description

Value

switch Whether the Call Home service is enabled.

The value can be "on" or "off".

Level

Super administrator

Usage Guidelines

Before executing this command, confirm that the basic configurations of the Call Home service are correct.

Example

Set the Call Home service.

admin:/>change call_home general switch=on
CAUTION: You are about to set the Call Home service. The Call Home service can periodically send health status data of the storage array to the technical support center. The data includes fault diagnosis data, performance statistics, logs, and configurations. The Call Home service does not send any application data or personal privacy data.
Suggestion: Enable the Call Home service to get remote support from the technical support center.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 380627

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next