No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show storage_pool analysis_result

show storage_pool analysis_result


The show storage_pool analysis_result command is used to display the predictive analysis results of a storage pool.


show storage_pool analysis_result pool_id=?





pool_id=? Storage pool ID.

To obtain the value, run the "show storage_pool general" command.



Usage Guidelines

The "show storage_pool analysis_result" command is executed to display the prediction analysis result of a storage pool.

OceanStor 18500 V5, 18500 V5 Kunpeng, 18800 V5 and 18800 V5 Kunpeng storage systems support this command.


Display the predictive analysis results of storage pool "0".

admin:/>show storage_pool analysis_result pool_id=0
Pool ID : 0
Last Analysis Time : --
Analysis Switch Enable Time : 2014-09-26/14:34:22 UTC+08:00
Tier0 Capacity Ratio(%) : --
Tier1 Capacity Ratio(%) : --
Tier2 Capacity Ratio(%) : --
Tier0 IOPS : --
Tier1 IOPS : --
Tier2 IOPS : --
Tier0 Bandwidth(KB/s) : --
Tier1 Bandwidth(KB/s) : --
Tier2 Bandwidth(KB/s) : --

System Response

The following table describes the parameter meanings.



Pool ID

Storage pool ID.

Last Analysis Time

Time when the latest prediction analysis is completed.

Analysis Switch Enable Time

Time when predictive analysis starts.

Tier0 Capacity Ratio(%)

Ratio of tier 0 capacity to the total storage pool capacity.

Tier1 Capacity Ratio(%)

Ratio of tier 1 capacity to the total storage pool capacity.

Tier2 Capacity Ratio(%)

Ratio of tier 2 capacity to the total storage pool capacity.

Tier0 IOPS

IOPS of tier 0.

Tier1 IOPS

IOPS of tier 1.

Tier2 IOPS

IOPS of tier 2.

Tier0 Bandwidth(KB/s)

Bandwidth of tier 0.

Tier1 Bandwidth(KB/s)

Bandwidth of tier 1.

Tier2 Bandwidth(KB/s)

Bandwidth of tier 2.

Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 378026

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next