No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show notification trap

show notification trap

Function

The show notification trap command is used to query the settings of the trap server.

Format

show notification trap [ server_id=? ]

Parameters

Parameter

Description

Value

server_id=? ID of the trap server.

To obtain the value, run "show notification trap" without parameters. The value can be an integer between 0 and 3.

Level

Guest

Usage Guidelines

  • To query the settings of all trap servers, run "show notification trap".
  • To query the settings of a specific trap server, run "show notification trap [ server_id=? ]".

Example

  • Query the settings of all trap servers.

    admin:/>show notification trap
    Server ID Server IP Server Port Trap Version Trap Type USM User Name
    --------- ------------ ----------- ------------ --------- -------------
    0         192.168.10.7 168         v3           Original  Kaimse 
    1         192.168.9.65 162         v1           All       --
    2         192.168.9.04 162         v2c          Parsed    --
    3         192.168.19.5 162         v3           All       user
  • Query the settings of the trap server whose ID is "0".

    admin:/>show notification trap server_id=0
    Server ID Server IP Server Port Trap Version Trap Type USM User Name 
    --------- ------------ ----------- ------------ --------- -------------
    0         192.168.10.7 168         v3           Original  Kaimse

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Server ID

ID of the trap server.

Server IP

Trap server address. The value can be an IP address or domain name. If the value is a domain name, all the IP addresses corresponding to the domain name must point to one server.

Server Port

Port ID of the trap server.

Trap Version

Version of the trap server.

Trap Type

Type of the trap server.

USM User Name

USM user name of the trap server.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 379868

Downloads: 54

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next