No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add port_group port

add port_group port

Function

The add port_group port command is used to add ports to a port group. The ID varies depending on a specific product.

Format

add port_group port { port_group_id=? | port_group_name=? } port_type=? port_id_list=?

Parameters

Parameter

Description

Value

port_group_id=? ID of a port group to which you want to add ports.

To obtain the value, run "show port_group general".

port_group_name=? Name of a port group to which you want to add ports.

To obtain the value, run "show port_group general".

port_type=? Type of a port that you want to add.

The value can be "FC", "ETH", "FCoE", or "IB", where:

  • "FC": indicates Fibre Channel ports.
  • "ETH": indicates ETH ports.
  • "FCoE": indicates FCoE ports.
  • "IB": indicates IB ports.
port_id_list=? ID of a port that you want to add.
  • To obtain the value, run "show port general".
  • When multiple ports need to be added, separate these port IDs with commas (,).

Level

Administrator

Usage Guidelines

None

Example

  • Add port "ENG0.A2.P2" whose type is "ETH" to port group "0".

    admin:/>add port_group port port_group_id=0 port_type=ETH port_id_list=ENG0.A2.P2
    Add port ENG0.A2.P2 to port group successfully.
  • Add port "ENG0.A2.P2" whose type is "ETH" to port group "portgroup1".

    admin:/>add port_group port port_group_name=portgroup1 port_type=ETH port_id_list=ENG0.A2.P2
    Add port ENG0.A2.P2 to port group successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 378605

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next