No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Command Reference
OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create vlan general

create vlan general

Function

The create vlan general command is used to create a VLAN.

Format

create vlan general vlan_id=? port_type=? [ eth_port_id=? ] [ bond_port_id=? ]

Parameters

Parameter

Description

Value

vlan_id=? VLAN ID (tag value).

The value is an integer between "1" and "4094".

port_type=? VLAN type.

There are two types of values:

  • eth: physical port
  • bond: bond port.
eth_port_id=? ID of a physical port.

To obtain the value, run the "show port general" command.

bond_port_id=? ID of a bond port.

To obtain the value, run the "show bond_port" command.

Level

Administrator

Usage Guidelines

  • When "port_type" is set to "eth", "eth_port_id" must be specified.
  • When "port_type" is set to "bond", "bond_port_id" must be specified.

Example

  • Create a VLAN whose ID is "1", port type is "eth", and port ID is "ENG0.A2P1".

    admin:/>create vlan general vlan_id=1 port_type=eth eth_port_id=ENG0.A2.P1
    Command executed successfully.
  • Check the VLAN you have created.

    admin:/>show vlan general
    Name Running Status VLAN ID MTU Port Type Port ID 
    ---------- ----------- ------- ---- ---------- ----------
    ENG0.A2.P0.2 Link Down 2 1500 ETH ENG0.A2.P0 
    ENG0.A2.P1.1 Link Down 1 1500 ETH ENG0.A2.P1

System Response

None

Translation
Download
Updated: 2020-03-19

Document ID: EDOC1000181601

Views: 406249

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next