No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show host general

show host general

Function

The show host general command is used to query the information on hosts.

Format

show host general [ host_id=? | host_name=? ]

Parameters

Parameter

Description

Value

host_id=? ID of a host.

To obtain the value, run "show host general" without parameters.

host_name=? Host name.

To obtain the value, run "show host general" without parameters.

Level

Guest

Usage Guidelines

  • To query the information on all hosts, run "show host general".
  • To query the information on a specific host, run "show host general host_id=?".
  • To query the information on a specific host, run "show host general host_name=?".

Example

  • Query the information on existing hosts.

    admin:/>show host general
    ID  Name  Health Status Operating System  IP Address  Model Location  vStore ID
    --- ----- ------------  ----------------  ----------- ----- --------  --------
    0 Host000 Normal Windows --                                               1
    1 Host001 Normal Windows --                                               1
    2 newhost001 Normal Linux -- 2058 newlocation                             1
    3 newhost002 Normal Linux 192.168.3.53 2458 newlocation                   1
    4 Host004 Normal Windows --                                               1
  • Query the information on host "1".

    admin:/>show host general host_id=1
     
    ID : 1
    Name : Host001
    Health Status : Normal
    Operating System : Windows
    IP Address : --
    Model : --
    Network Name :
    Location : --
    vStore ID : 1
  • Query the information on host "name1".

    admin:/>show host general host_name=name1
     
    ID : 1
    Name : name1
    Health Status : Normal
    Operating System : Windows
    IP Address : --
    Model : --
    Network Name :
    Location : --
    vStore ID : 1

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Host ID.

Name

Host name.

Health Status

Health status of the host.

Operating System

Type of the host operating system.

IP Address

Host IP address.

Model

Host multipathing type.

Network Name

Name of the network.

Location

Host location.

vStore ID

vStore ID.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 383138

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next