No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change iscsi target_name

change iscsi target_name


The change iscsi target_name command is used to change the name of the iSCSI target configured for the storage system.


change iscsi target_name iscsi_name=?





iscsi_name=? Last field of the new name of an iSCSI initiator.
The first six fields of a target name cannot be changed. Only the last field can be modified.

The value contains 1 to 31 ASCII characters including digits, letters, hyphens (-), colons (:), and periods (.).



Usage Guidelines

  • Running this command interrupts all services associated with the specified target.
  • Before running this command, ensure that all connections to the specified target are disconnected.
  • Initiators and targets are relative. In the scenario where storage systems A and B connect to each other in iSCSI mode, from the perspective of storage system A, storage system A is the initiator and storage system B is the target. Likewise, from the perspective of storage system B, storage system B is the initiator and storage system A is the target.


Change the last field of the name of an initiator on the storage system to "iqn.2006-08:tgt".

admin:/>change iscsi target_name iscsi_name=iqn.2006-08:tgt
DANGER: You are about to change the target name. This operation will interrupt all replication,heterogeneous and host services associated with the target.
Suggestion: Before performing this operation, ensure that all replication,heterogeneous and host services associated with the target are stopped.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 378205

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next