No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create antivirus_server general

create antivirus_server general


The create antivirus_server general command is used to create an antivirus server.


create antivirus_server general name=? ip=? port=? vendor=? logical_port_name_list=?





name=? Name of the antivirus sever.

The value consists of 1 to 127 ASCII characters including numbers, letters, underscores (_), hyphens (-), and periods (.).

ip=? IP address of the antivirus server.

An IPv4 address consists of four 8-digit unsigned integers, with each integer ranging from 0 to 255. An IPv6 address consists of eight 16-digit unsigned integers, with each integer represented by four hexadecimal numbers.

port=? Port of the antivirus agent on the antivirus server. The default port of the antivirus agent is "26810".

The value ranges from 1 to 65535.

vendor=? Antivirus software.

The value can be "symantec_protection_engine", "symantec_endpoint_protection", "trendmicro_serverprotect", "mcafee_virusscan", "sophos_antivirus", "kaspersky_antivirus_protection" or "rising_antivirus", where:

  • "symantec_protection_engine": Symantec SPE antivirus software supporting ICAP.
  • "symantec_endpoint_protection": Symantec SEP antivirus software.
  • "trendmicro_serverprotect": Trend Micro antivirus software.
  • "mcafee_virusscan": McAfee antivirus software.
  • "sophos_antivirus": Sophos antivirus software.
  • "kaspersky_antivirus_protection": Kaspersky antivirus software.
  • "rising_antivirus": Rising antivirus software.
logical_port_name_list=? List of available logical ports of the antivirus server.

To obtain the value, run the "show logical_port general" command. Multiple logical ports are separated by commas (,). For example, "lif01,lif02".



Usage Guidelines

  • Before running this command, ensure that the system is running correctly.
  • Before running this command, ensure that the antivirus module is running correctly.


Create an antivirus server whose name is "srv1", IP address is "", port is "26810", antivirus software is "symantec_endpoint_protection", and logical port list is "lif01,lif02".

admin:/>create antivirus_server general name=srv1 ip= port=26810 vendor=symantec_endpoint_protection logical_port_name_list=lif01,lif02
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 381745

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next