No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change share_permission ftp

change share_permission ftp


The change share_permission ftp command is used to change FTP share permission.


change share_permission ftp user_id=? { access_name=? | share_path=? | file_system_id=? | permission=? | up_bandwidth=? | down_bandwidth=? } *





user_id=? ID of the user.

The value ranges from 0 to 900,000.

access_name=? Name of the user.

The value contains 1 to 32 ASCII characters, cannot end with periods (.), and cannot contain the following letters "/\[]<>+:;,?*|=@.

share_path=? Share path of the ftp.

The value contains 1 to 1023 ASCII characters.

file_system_id=? ID of the file system.

The value ranges from 0 to 65535.

permission=? Permission expressed in 5-bit binaries. Such permissions are permissions to create directories, browse directories and files, and upload, download and delete files and directories.

The value ranges from 0 to 31.

up_bandwidth=? Upload bandwidth.

The value ranges from 0 to 102400.

down_bandwidth=? Download bandwidth.

The value ranges from 0 to 102400.



Usage Guidelines



  • Change FTP share permission.

    admin:/>change share_permission ftp user_id=100001 access_name=ftpuser share_path=/fs0/ftp file_system_id=0 permission=0 up_bandwidth=10 down_bandwidth=10
    Command executed successfully.
  • Show FTP share permission.

    admin:/>show share_permission ftp user_id=100001
    User ID : 100001
    Access Name : ftpuser
    Share Path : /fs0/ftp
    Up Bandwidth : 10
    Down Bandwidth : 10
    File System ID : 0
    Permission : None

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 380240

Downloads: 54

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next