No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
test kms key_backup

test kms key_backup


The test kms key_backup command is used to test the key file backup server configurations of the internal key management service.


test kms key_backup server_address=? path=? user=? password=? protocol=? port=?





server_address=? Server address.

The value can be a domain name or an IPv4 or IPv6 address. The domain name is a case-insensitive string of 1 to 255 characters, including letters, digits and hyphens (-). Domain names at various levels are separated by periods (.). Hyphens (-) cannot be the start or end of the domain name.

path=? The storage path of the key file on the server.

The value contains 1 to 255 characters. The file save path cannot contain special characters including ':?"<>|* or start with a period (.) or space. The first character after the delimiter (/ or \) cannot be a period (.).

user=? Server user name.

ASCII string without single quotation marks(length is from 1 to 63).

password=? Server user password.

The value contains 1 to 63 ASCII characters.

protocol=? Transfer protocol type.

The value can be "FTP" or "SFTP".

To ensure the security of data transfer, you are advised to use Secure File Transfer Protocol (SFTP).

port=? Server port number.

The value is an integer ranging from 1 to 65535.



Usage Guidelines

  • If the storage system serves as a server in the file transfer with external systems, it supports the SFTP service only. If the storage system serves as a client, it supports both the FTP and SFTP services.


Test the key file backup server configurations of the internal key management service. The address of the SFTP server is "", folder for storing key files is "/home/InnerKey", and user name and password for logging in to the SFTP server are "admin" and "12345678" respectively.

admin:/>test kms key_backup server_address= path=/home/InnerKey user=admin password=********  protocol=SFTP port=22
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 382862

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next