No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show performance mode

show performance mode

Function

The show performance mode command is used to query the performance statistical modes of the current system.

Format

show performance mode [mode=?]

Parameters

Parameter

Description

Value

mode=? Mode name.

To obtain the value, run the "show performance mode" command without parameters.

Level

Guest

Usage Guidelines

  • Run the "show performance mode" command to query all the performance statistical modes.
  • Run the "show performance mode mode=?" command to query a specific performance statistical mode.

Example

  • Query all the performance statistical modes.

    admin:/>show performance mode 
     
      Mode Name           Statistical Object  
      ------------------  ------------------  
      controller_default  Controller          
      controller_san      Controller          
      controller_nas      Controller          
      controller_disk     Controller
  • Query the performance statistical mode whose name is controller_default.

    admin:/>show performance mode mode=controller_default
     
      Mode Name        : controller_default             
      Statistic Object : Controller                     
      Statistical Item : CPU Usage(%)
                         Throughput(IOPS)(IO/s)
                         SCSI IOPS (IO/s)
                         ISCSI IOPS (IO/s)
                         File OPS
                         NFS operation count per second
                         CIFS operation count per second
                         Total Disk IOPS(IO/s)
                         Read Bandwidth(MB/s)
                         Write Bandwidth(MB/s)
                         % Hit
                         Cache Water(%)

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Mode Name

Mode name.

Statistic Object

Performance statistical object.

Statistical Item

Performance statistical data type.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 379887

Downloads: 54

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next