No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create quorum_server general

create quorum_server general


The create quorum_server general command is used to create a third-place quorum server.


create quorum_server general active_ip=? server_name=? [ active_server_port=? | description=? ] *





active_ip=? Active IP address of the quorum server.

Active IP address of the quorum server.

server_name=? Local server name.

The value contains 1 to 31 ASCII characters including digits, letters, underscores (_), hyphens (-), and periods (.), the first character must be a letter or number.

active_server_port=? Server communication port ID.

The value is an integer ranging from 1 to 65535. If this parameter is not specified, the system uses the default port 30002.

description=? Local description of a server.

The value consists of 1 to 127 characters, including digits, letters, underscores (_), hyphens (-) and periods (.).



Usage Guidelines



Create a third-place quorum server whose IP address is "" and server name is "cps0".

admin:/>create quorum_server general active_ip= server_name=cps0
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 379894

Downloads: 54

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next