No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Command Reference
OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show replication_connection_status general

show replication_connection_status general


The show replication_connection_status general command is used to query information about I/Os on remote replication links between the local array and a specified remote array.


show replication_connection_status general remote_device_id=?





remote_device_id ID of a remote device.

To obtain the value, run "show remote_device general".



Usage Guidelines



Query information about I/Os on remote replication links between the local array and a specified remote array.

admin:/>show replication_connection_status general remote_device_id=0
  Pair ID           Remote Device ID  Local LUN Name  Remote LUN Name  Connection Status               Recommended Controller  Is Primary  
  ----------------  ----------------  --------------  ---------------  ------------------------------  ----------------------  ----------  
  74a063ff51090000  0                 LUN0010000      LUN0010000       All I/Os need to be forwarded   0B                      Yes         
  74a063ff51090001  0                 LUN0010001      LUN0010001       All I/Os need to be forwarded   0A                      Yes         
  74a063ff51090002  0                 LUN0010002      LUN0010002       All I/Os need to be forwarded   0D                      Yes         
  74a063ff51090003  0                 LUN0010003      LUN0010003       All I/Os need to be forwarded   0C                      Yes         
  74a063ff51090004  0                 LUN0010004      LUN0010004       All I/Os need to be forwarded   0B                      No

System Response

The following table describes the parameter meanings.



Pair ID

Remote replication ID.

Remote Device ID

Remote device ID.

Remote LUN Name

Remote LUN Name.

Local LUN Name

Local LUN Name.

Connection Status

Connection Status.

Recommended Controller

Recommended controller to be switched.

Is Primary

Whether the array is the primary array of remote replication.

Updated: 2020-03-19

Document ID: EDOC1000181601

Views: 406343

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next