No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Command Reference
OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system time

change system time

Function

The change system time command is used to change the storage system's time. If the storage system's time is incorrect, you can run this command to change it.

Format

change system time time=?

Parameters

Parameter

Description

Value

time=? Updated time of the storage system.

The value is in the format of "year-month-day/hour:minute:second", where:

  • "year": The year ranges from 2000 to 2035.
  • "month": The month ranges from 01 to 12.
  • "day": The day ranges from 01 to 31.
  • "hour": The hour ranges from 00 to 23.
  • "minute": The minute ranges from 00 to 59.
  • "second": The second ranges from 00 to 59.

Level

Super administrator

Usage Guidelines

  • If the storage system's time is changed incorrectly, the scheduled tasks and the maintenance engineers' work are adversely affected.
  • Before running this command, check whether the time that you want to set is correct.
  • The system time ranges from 2000-01-01/00:00:01 to 2035-12-31/23:59:59.
  • If the time synchronization function is enabled, you are not allowed to change the system time.

Example

Change the system time to "2014-04-06/11:22:05".

admin:/>change system time time=2014-04-06/11:22:05
WARNING: You are about to change the system time.This operation may affect licenses, alarms, and SystemReporter.
Suggestion: Before performing this operation, ensure that the time needs to be changed.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.
 

System Response

None

Translation
Download
Updated: 2020-03-19

Document ID: EDOC1000181601

Views: 406323

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next