No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show snmp version

show snmp version


The show snmp version command is used to query the switch status of SNMPv1, SNMPv2c, and SNMP Unique EngineID.


show snmp version





Usage Guidelines

  • By default, SNMPv1, SNMPv2c, and SNMP Unique EngineID are in the "Off" status.
  • The default switch status of the SNMPv3 protocol is "On".


  • Query the switch status of SNMPv1, SNMPv2c, and SNMP Unique EngineID.

    developer:/>show snmp version
    SNMP V1V2C Switch:Off
    SNMP Unique EngineID Switch:Off
  • Query the switch status of SNMPv1 and SNMPv2c.

    admin:/>show snmp version
    SNMP V1V2C Switch : Off

System Response

The following table describes the parameter meanings.



SNMP V1V2C Switch

Switch status of SNMPv1 and SNMPv2c.

Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 383150

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next