No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show smartqos_policy general

show smartqos_policy general


The show smartqos_policy general command is used to query details on existing SmartQoS policies of the storage system. By using the SmartQoS, the storage system can allocate its resources to different types of I/Os on demand.


show smartqos_policy general [ smartqos_policy_id=? ]





smartqos_policy_id=? ID of a SmartQoS policy.

To obtain the value, run "show smartqos_policy general" without parameters.



Usage Guidelines

  • To query details on existing SmartQoS policies, run show smartqos_policy general.
  • To query details on a specific SmartQoS policy, run show smartqos_policy general smartqos_policy_id=?.


  • Query details on existing SmartQoS policies.

    admin:/>show smartqos_policy general
    ID Name Health Status Running Status IO Type Enabled LUN List Filesystem List
    -- ------- ------------- -------------- ---------- ------- -------- -------
    0 newqos Normal Inactive Read_write No -- --
    3 newqos2 Normal Inactive Read No 0,1,2 3,4,5
    2 newqos3 Normal Inactive Write No 7 --
    4 newqos3 Normal Inactive Write No -- 8,9
  • Query details on SmartQoS policy "0".

    admin:/>show smartqos_policy general smartqos_policy_id=0
    ID : 0
    Name : SmartQoS000
    Health Status : Normal
    Running Status : Inactive
    IO Type : Read
    Enabled : No
    LUN List : 0,1,2,3
    Max Bandwidth(MBps) : --
    Min Bandwidth(MBps) : --
    Max IOPS : 5000
    Min IOPS : --
    Latency(ms) : 0
    Schedule Policy : Weekly
    Schedule Start Time : 2013-12-21
    Start Time : 08:00
    Duration : 24 hour(s),0 minute(s)
    Schedule Days : Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
    Filesystem List: --

System Response

The following table describes the parameter meanings.




SmartQoS ID.

Health Status

Health status.


SmartQoS name.

Running Status

Running status.

IO Type

Type of the I/O that you want to control.

LUN List

ID list of LUNs that you add to the SmartQoS policy.

Max Bandwidth(MBps)

Maximum bandwidth.

Min Bandwidth(MBps)

Minimum bandwidth.


Maximum IOPS.


Minimum IOPS.


Latency for the SmartQoS policy.

Schedule Policy

Time policy for triggering SmartQoS.


Activation status of SmartQoS.

Schedule Start Time

Day from which a scheduled SmartQoS task will be started.

Start Time

Time from which a scheduled SmartQoS task will be started on a specific day.


Duration for performing a scheduled SmartQoS task.

Filesystem List

ID list of file systems that you add to a SmartQoS policy.

Schedule Days

Scheduling date.

Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 381236

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next