No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change mirror_copy general

change mirror_copy general

Function

The change mirror_copy general command is used to set the attributes of a mirror copy.

Format

change mirror_copy general mirror_lun_id=? mirror_copy_id=? [ sync_speed=? ] [ read_priority=? ]

Parameters

Parameter

Description

Value

mirror_lun_id=?

ID of a mirror LUN.

Run the "show mirror_lun general" command without parameters to obtain the value.

mirror_copy_id=?

ID of a mirror copy.

Run the "show mirror_copy general mirror_lun_id=?" command to obtain the value.

sync_speed=?

Synchronization speed.

The value is Low, Middle, High, or Highest.

read_priority=?

Read-first.

The value is yes or no.

Level

Administrator

Usage Guidelines

  • Run the "change mirror_copy general mirror_lun_id=? mirror_copy_id=? sync_speed=?" command to set the synchronization speed of a mirror copy.
  • Run the "change mirror_copy general mirror_lun_id=? mirror_copy_id=? read_priority=?" command to set the mirror copy to read first.

Example

  • Sets the synchronization speed of a mirror copy.
    admin:/>change mirror_copy general mirror_lun_id=0 mirror_copy_id=6 sync_speed=High 
    Command executed successfully.
  • Sets a mirror copy to read-first.
    admin:/>change mirror_copy general mirror_lun_id=0 mirror_copy_id=6 read_priority=yes 
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 320207

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next