No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete initiator iscsi

delete initiator iscsi


The delete initiator iscsi command is used to delete Internet Small Computer Systems Interface (iSCSI) initiators. You can disable hosts from accessing the storage resources of the storage system by running this command.


delete initiator iscsi iscsi_iqn_name=?





iscsi_iqn_name=? iSCSI qualified name (IQN) of an iSCSI initiator.

To obtain the value, run "show initiator".



Usage Guidelines

  • Before you perform this operation, ensure that you select the correct initiator and services running on the host to which the initiator is added are stopped. Otherwise, running delete initiator iscsi fails.
  • Disconnect the initiator from the host before you delete the initiator.


To delete the iSCSI initiator whose IQN is "iqn.01", run the following command.

admin:/>delete initiator iscsi iscsi_iqn_name=iqn.01
CAUTION: You are about to delete the initiator. This operation will cause the initiator unavailable.
Suggestion: Before performing this operation, ensure that the initiator needs to be deleted.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 381864

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next