No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove smartqos_policy lun

remove smartqos_policy lun


The remove smartqos_policy lun command is used to remove logical unit numbers (LUNs) from a specific SmartQoS policy.


remove smartqos_policy lun smartqos_policy_id=? lun_id_list=?






ID of a SmartQoS policy.

To obtain the value, run "show smartqos_policy general".


IDs of the LUNs that you want to remove.

To obtain the value, run "show smartqos_policy general".

You can specify multiple LUN IDs separated by commas (,), or the ID range separated by hyphens (-), such as: 0,5-8.

A maximum of 64 objects are allowed.



Usage Guidelines

After you remove LUNs from a SmartQoS policy, the policy is no longer effective for the removed LUNs.


Remove LUNs "3", "4", and "5" from SmartQoS policy "0".

admin:/>remove smartqos_policy lun smartqos_policy_id=0 lun_id_list=3,4,5 
WARNING: You are about to remove LUN from traffic control policy. 
This operation may affect LUN performance. 
Suggestion: Before performing this operation, ensure that the preceding risk is acceptable and the correct traffic control policy and LUN are selected. 
Have you read warning message carefully?(y/n)y 
Are you sure really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 328178

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next