No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
poweroff interface_module

poweroff interface_module

Function

The poweroff interface_module command is used to power off a specific interface module.

Format

poweroff interface_module interface_module_id=?

Parameters

Parameter

Description

Value

interface_module_id=?

ID of an interface module.

To obtain the value, run "show interface_module" without parameter.

Level

Administrator

Usage Guidelines

Before you perform this operation, ensure that the services of all ports on the interface module are stopped.

Example

To power off the interface module whose ID is CTE0.SMM0, run the following command. The ID and output vary depending on a specific product.

admin:/>poweroff interface_module interface_module_id=CTE0.SMM0 
DANGER: You are about to power off the interface module.  
This operation will cause that the services of all ports on the interface module are interrupted.  
Suggestion: Before you perform this operation, ensure that the services of all ports on the interface module are stopped. 
Have you read danger alert message carefully?(y/n)Y 
Are you sure you really want to perform the operation?(y/n)Y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 327851

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next