No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Command Reference
OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show smart_cache_partition file_system

show smart_cache_partition file_system


The show smart_cache_partition file_system command is used to query the file systems in a SmartCache partition.


show smart_cache_partition file_system smart_cache_partition_id=?





smart_cache_partition_id=? SmartCache partition ID.

To obtain the value, run "show smart_cache_partition general".



Usage Guidelines

OceanStor 18500 V5, 18500 V5 Kunpeng, 18800 V5 and 18800 V5 Kunpeng storage systems support this command.


Query the file systems in SmartCache partition "0".

admin:/>show smart_cache_partition file_system smart_cache_partition_id=0
File System ID Name Pool ID Capacity Health Status Running Status Smart Cache Partition ID Smart Cache Cached Size Smart Cache Hit Rage(%) 
-------------- ---- ------- ---------- ------------- -------------- ------------------------ ----------------------- ----------------------- 
1 f1 1 16.000GB Normal Online 0 0.000B 0 

System Response

The following table describes the parameter meanings.



File System ID

File system ID.


File system name.

Pool ID

Owning storage pool of a file system.


Capacity of the current partition.

Health Status

Health status of a file system.

Running Status

Running status of a file system.

Smart Cache Partition ID

SmartCache partition ID.

Smart Cache Cached Size

SmartCache cached size.

Smart Cache Hit Rage(%)

SmartCache hit rate.

Updated: 2020-03-19

Document ID: EDOC1000181601

Views: 406328

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next