No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show notification syslog

show notification syslog

Function

The show notification syslog command is used to query the settings of Syslog notification.

Format

show notification syslog

Parameters

None

Level

Guest

Usage Guidelines

None

Example

Query the settings of Syslog notification.

admin:/>show notification syslog
  Enabled                  : Yes 
  Alert Level              : Warning 
  Syslog Server IP         : 192.168.0.126
  Enable Alarm             : Yes
  Enable Recovery Alarm    : No
  Enable Event             : No
  Enabled Send System Name : Yes
  Syslog Server Port       : 514
  Sending Channel          : UDP
  Enable Call Home         : Yes
  Enable Security Log      : Yes

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Enabled

Whether Syslog alarm notification is enabled.

Alert Level

Lowest alarm level required by Syslog alarm notification to report an alarm.

Syslog Server IP

IP address of the Syslog server.

Enable Alarm

Whether Syslog alarm notification is enabled. This function is enabled by default.

Enable Recovery Alarm

Whether Syslog alarm clearing notification is enabled. This function is disabled by default.

Enable Event

Whether Syslog event notification is enabled. This function is disabled by default.

Enable Send System Name

Whether the storage system name is included in Syslog.

Syslog Server Port

Port number of the Syslog server that receives logs.

Sending Channel

Syslog sending channel.

Enable Call Home

Whether Call Home service Syslog notification is enabled. This function is disabled by default.

Enable Security Log

Whether security log Syslog notification is enabled. This function is disabled by default.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 377101

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next