No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove remote_support user_contact

remove remote_support user_contact

Function

The remove remote_support user_contact command is used to delete the contacts of eSerivce.

Format

remove remote_support user_contact contact_id=?

Parameters

Parameter

Description

Value

contact_id User contact ID.

The value is an integer from 0 to 4. Press Ctrl+A to view the list of available contacts.

Level

Super administrator

Usage Guidelines

This command is used to delete the contacts of eService. You can query the added contacts of a storage system by running the "show remote_support user_contact" command.

Example

Delete the contacts of eService.

admin:/>remove remote_support user_contact contact_id=0
CAUTION: You are about to delete a eService contact. The technical support center notifies users of the device health status through the contact information configured for the eService. If you delete all eService contacts, the technical support center cannot obtain the contact information. 
Suggestion: Before performing this operation, ensure that the contact does not need to receive the device health notification provided by the eService. To receive the device health notification, reserve at least one contact.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 383127

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next