No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show quorum_server general

show quorum_server general


The show quorum_server general command is used to query third-place quorum servers.


show quorum_server general [ server_id=? ]





server_id=? ID of the quorum server.

Run the "show quorum_server general" command to obtain the value.



Usage Guidelines



  • To query all quorum servers, run the following command.

    admin:/>show quorum_server general
    Server ID  Server Name  Address         Port          Running Status        
    ---------- ------------ --------------- -----------   ------------
    0          arb-srv   30002         Online
    Command executed successfully.
  • To query quorum server 0, run the following command.

    admin:/>show quorum_server general server_id=0
    Server ID : 0
    Server Name : arb-srv
    Description : arbitration service in site C
    Active IP:
    Active Port: 30002
    Standby IP:
    Standby Port: 8000
    Running Status: Online
    Usable Cipher Suites: AES256+RSA+SHA256, AES256+RSA+SHA
    All Cipher Suites: AES256+RSA+SHA, AES256+RSA+SHA256

System Response

The following table describes the parameter meanings.



Server ID

ID of the quorum server.

Server Name

Local server name.


Local description of a server.

Active IP

Active address of the quorum servers.

Active Port

Active server port of the quorum server.

Standby IP

Standby address of the quorum server.

Standby Port

Standby port of the quorum server.

Running Status

Running status.

Usable Cipher Suites

Usable cipher suites.

All Cipher Suites

All cipher suites.

Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 380664

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next