No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Command Reference
OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show system dst

show system dst


The show system dst command is used to query the daylight saving time (DST) settings of the storage system.


show system dst continent=? capital=?





continent=? General area (continent or region) where the storage system resides.

The value can be "Africa", "America", "Antarctica", "Arctic", "Asia", "Atlantic", "Australia", "Etc", "Europe", "Indian", "Pacific", or "other".

capital=? Specific area (major city, province, or state) where the storage system resides.

The value varies depending on the continent=? parameter. Refer to the information displayed on the CLI.



Usage Guidelines

The storage system automatically sets the DST based on the configured time zone. The DST is not applicable to some time zones.


To query the DST settings of the storage system, run the following command. The command output varies depending on CLI.

admin:/>show system dst continent=Africa capital=Cairo
  Time Zone            : Africa/Cairo  
  Begin Time           : 04-25 18:00:00 
  End Time             : 09-26 18:00:00 
  Adjust Time(Minutes) : 60            
  Config Mode          : Date

System Response

The following table describes the parameter meanings.



Time Zone

Time zone name.

Begin Time

Start time of daylight saving time.

Adjust Time(Minutes)

During the time of daylight saving time adjustment.

End Time

End time of daylight saving time.

Config Mode

Configuration method of daylight saving time.

Updated: 2020-03-19

Document ID: EDOC1000181601

Views: 406259

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next