No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show storage_pool tier

show storage_pool tier


The show storage_pool tier command is used to query the information on existing storage tiers in a storage pool.


show storage_pool tier pool_id=?






0peration type.

To obtain the value, run the "show storage_pool general" command in the guest view.



Usage Guidelines



Querying information about storage tiers in the storage pool whose ID is 0.

admin:/>show storage_pool tier pool_id=0 
Name : Performance  
Pool ID : 0  
Health Status : Normal  
Running Status : Online  
Capacity : 500.000GB  
Allocated Capacity : 6.000GB  
Free Capacity : 494.000GB 
RAID Level : RAID6 
Capacity Shrink Range : [100.000GB, 500.000GB] 
RAID Disk Number : 6  
Stripe Depth : 128.000KB 
Estimated Move-up Data : 0.000B  
Estimated Move-down Data : 0.000B

System Response

The following table describes the parameter meanings.




Storage pool name.

Pool ID

Storage pool ID.

Health Status

Health status.

Running status

Operating status.


Total capacity of the storage pool.

Allocated Capacity

Used capacity of the storage pool.

Free Capacity

Total free capacity of the storage pool.

RAID Level

RAID level of the storage pool.

Capacity Shrink Range

Maximum capacity reduction range of the storage pool.

RAID Disk Number

RAID disk number of the storage pool.

Stripe Depth

Stripe depth of the storage pool.

Estimated Move-up Data

Amount of data to be migrated to a higher performance tier of the storage pool.

Estimated Move-down Data

Amount of data to be migrated to a lower performance tier of the storage pool.

Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 321864

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next