No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create share_permission cifs

create share_permission cifs


The create share_permission cifs command is used to create a CIFS share permission.


create share_permission cifs access_name=? share_id=? permission_type=?






Indicates the access name. The access name can be a resource user or user group, or an active directory user or user group.

  • The value consists of 1 to 288 characters.
  • Add @ before a resource user group name to separate it from a resource user.


Indicates the share ID.

The value is an integer ranging from 0 to 18,446,744,073,709,551,615.


Indicates the permission type.

The value can be "read_only", "read_write", "no_access", or "all_control", where

  • read_only: only read permission.
  • read_write: both read and write permissions.
  • no_access: no permission.
  • all_control: The user has the read and write permissions and can change the permission.



Usage Guidelines

Parameters access_name,share_id and permission_type must be entered at the same time.


  • To create a CIFS share permission with access_name being a resource user, run the following command:
    admin:/>create share_permission cifs access_name=user1 share_id=4 permission_type=all_control 
    Command executed successfully.
  • To create a CIFS share permission with access_name being a resource user group, run the following command:
    admin:/>create share_permission cifs access_name=@group1 share_id=4 permission_type=all_control 
    Command executed successfully.
  • To query the permission creation results, run the following command:
    admin:/>show share_permission cifs share_id=4 
    Share Permission ID Access Name Share ID Domain Type Permission Type  
    ------------------- ----------- -------- ----------- ---------------  
    1 user1 4 Local All Control  
    2 @group1 4 Local All Control

System Response


Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 321633

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next