No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete security_rule

delete security_rule


The delete security_rule command is used to delete security rules.


delete security_rule rule_id=?





rule_id=? ID of a security rule.

To obtain the value, run "show security_rule". The value is an integer from 1 to 32.



Usage Guidelines

Deleted security rules cannot be restored.


Delete security rule "31".

admin:/>delete security_rule rule_id=31
WARNING: You are about to delete an IP address white list. This operation will make the IP addresses in this IP address white list unable to access the storage system when the IP address security rule is enabled.
Suggestion: Confirm that you need to delete this IP address white list.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 381416

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next