No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
test domain ldap

test domain ldap

Function

The test domain ldap command is used to test the connectivity of an LDAP server.

Format

test domain ldap [ address=? ] [ controller=? ]

Parameters

Parameter

Description

Value

address=?

IP address or host name of the LDAP server.

The value can be IP address or host name, and contains 1 to 255 letters.

  • IP address-IPv4 or IPv6 address.
  • Host name.
    • Contains 1 to 255 letters, digits, hyphens (-), periods (.), and underscores (_).
    • Must start with a letter or digit and cannot end with a hyphen (-) or underscore (_).
    • Cannot contain consecutive periods (.), pure digits, or the combination of a period and underscore (._ or _.).

controller=?

Controller ID.

The value format can be "XA", "XB", "XC" and "XD", where the value of X can be an integer ranging from 0 to 3. To obtain the value, run the show controller general command.

Level

Guest

Usage Guidelines

None

Example

Test the connectivity of the LDAP server whose IP address is "10.148.105.124".

admin:/>test domain ldap address=10.148.105.124 controller=0A 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181601

Views: 310431

Downloads: 39

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next