No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add smartqos_policy lun_group

add smartqos_policy lun_group


The add smartqos_policy lun_group command is used to add LUNs in a specified LUN group to a SmartQoS policy.


add smartqos_policy lun_group smartqos_policy_id=? lun_group_id_list=?





smartqos_policy_id=? ID of a SmartQoS policy.

To obtain the value, run "show smartqos_policy general".

lun_group_id_list=? ID list of LUN groups.

To obtain the value, run "show lun_group general". You can specify multiple lun_group IDs separated by commas (,), or the ID range separated by hyphens (-), such as: 0,5-8.

A maximum of 64 objects are allowed.



Usage Guidelines

After you add LUN groups to a SmartQoS policy, the policy will be effective for the LUNs in the added LUN groups.


Add LUNs in LUN groups "1" and "2" to SmartQoS policy "0".

admin:/>add smartqos_policy lun_group smartqos_policy_id=0 lun_group_id_list=1,2
CAUTION: You are about to add LUN groups into traffic control policy.
This operation may affect LUN performance of the LUN group.
Suggestion: Before performing this operation, ensure that the preceding risk is acceptable and the correct traffic control policy and LUN group are selected.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 380741

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next