No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove hypervault remote_resource

remove hypervault remote_resource

Function

The remove hypervault remote_resource command is used to delete the remote backup function.

Format

remove hypervault remote_resource hypervault_id=? [ reserve_copy=? ]

Parameters

Parameter

Description

Value

hypervault_id=? ID of the HyperVault object.

To obtain the value, run "show hypervault general" without parameters.

reserve_copy=? Copy reserving policy.

The value is "yes" or "no", where:

  • "yes": to reserve copies.
  • "no": to delete copies.
The default value is "yes".

Level

Administrator

Usage Guidelines

None

Example

To delete remote backup of HyperVault task "9747215445131264", run the following command.

admin:/>remove hypervault remote_resource hypervault_id=9747215445131264
DANGER: You are about to remove the remote backup function of HyperVault.
This operation deletes the remote backup relationship between the primary and secondary file systems. New data written into the primary file system cannot be remotely backed up. Data of the file system copies on the secondary file system cannot be recovered to the primary system. The deletion cannot be undone.
Suggestion: Before performing this operation, ensure that you have selected the correct object to delete.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 380123

Downloads: 54

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next