No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete iscsi target

delete iscsi target

Function

The delete iscsi target command is used to delete an iSCSI target.

Format

delete iscsi target iscsi_id=? local_control_id=?

Parameters

Parameter

Description

Value

iscsi_id=? iSCSI link ID.

To obtain the value, run "show iscsi target" without parameters.

local_control_id=? Local controller ID.

The value is in the format of "XA", "XB", "XC", or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".

Level

Administrator

Usage Guidelines

None

Example

Delete target "0" of the iSCSI link on local controller 0A.

admin:/>delete iscsi target iscsi_id=0 local_control_id=0A
Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 381406

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next