No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change dns_zone general

change dns_zone general

Function

The change dns_zone general command is used to modify the name a DNS Zone.

Format

change dns_zone general zone_name=? new_name=?

Parameters

Parameter

Description

Value

zone_name=?

Name of a DNS Zone.

A name contains 1 to 255 characters and consists of labels separated by periods (.). A label contains 1 to 63 characters including letters (case-insensitive), digits, hyphens (-), and underscores (_), and must start and end with a letter or a digit.

new_name

New name of the DNS Zone.

A name contains 1 to 255 characters and consists of labels separated by periods (.). A label contains 1 to 63 characters including letters (case-insensitive), digits, hyphens (-), and underscores (_), and must start and end with a letter or a digit.

Level

Administrator

Usage Guidelines

None

Example

Change the name of a DNS Zone.

admin:/>change dns_zone general zone_name=zone1.nas.com new_name=zone2.nas.com 
DANGER: You are about to modify properties of a DNS Zone. This operation may cause you to fail to access services by using the Zone name before modification. 
Suggestion: Before performing this operation, confirm that the modification is necessary. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 320503

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next