No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create logical_port eth

create logical_port eth

Function

The create logical_port eth command is used to create a logical Ethernet port.

Format

create logical_port eth name=? eth_port_id=? address_family=? ipv4_address=? ipv4_mask=? [ ipv4_gateway=? ] ipv6_address=? ipv6_mask=? [ ipv6_gateway=? ] [ role=? ] [ is_private=? ] [ activation_status=? ] [ failover_enabled=? ] [ failback_mode=? ] [ failover_group_id=? ] [ ddns_status=? ] [ dns_zone_name=? ] [ listen_dns_query_enabled=? ]

Parameters

Parameter

Description

Value

name=? Name of the logical port you want to create.

The value contains 1 to 31 ASCII characters, including digits, letters, underscores (_), hyphens (-), and periods (.).

eth_port_id=? Ethernet port ID.

To obtain the value, run the "show port general physical_type=eth" command.

address_family=? Address family of a logical port.

The value can be "IPv4" or "IPv6".

ipv4_address=? IPv4 address of a logical port.

-

ipv4_mask=? IPv4 mask of a logical port.

-

ipv4_gateway=? IPv4 gateway of a logical port.

-

ipv6_address=? IPv6 address of a logical port.

-

ipv6_mask=? IPv6 mask of a logical port.

-

ipv6_gateway=? IPv6 getaway of a logical port.

-

role=? Logical port role.

The value can be "management", "service", or "management+service", where:

  • "management": the role of management.
  • "service": the role of data.
  • "management+service": the role of management and data.
is_private=? Whether a logical port is private.

The value can be "yes" or "no". The default value is "no".

failover_enabled=? Whether failover is enabled for a logical port.

The value can be "yes" or "no".

failback_mode=? Failback mode of a logical port.

The value can be "manually" or "automatically".

activation_status=? Whether a logical port is activated.

The value can be "yes" or "no".The default value is "yes".

failover_group_id=? Failover group ID.

The value is an integer from 1 to 1024.

ddns_status=? Whether dynamic DNS turns on for a logical port.

The value can be "on" or "off". The default value is "on".

dns_zone_name DNS Zone name.

A name contains 1 to 255 characters and consists of labels separated by periods (.). A label contains 1 to 63 characters including letters (case-insensitive), digits, hyphens (-), and underscores (_), and must start and end with a letter or a digit. To obtain the value, run the "show dns_zone general" command without parameters.

listen_dns_query_enabled Whether the current logical port listens to DNS requests.

The value can be:

  • "no": not listening to DNS requests.
  • "yes": listening to DNS requests.

Level

Administrator

Usage Guidelines

  • When "address_family" is set to "IPv4","ipv4_address" must be specified.
  • When "address_family" is set to "IPv4","ipv4_mask" must be specified.
  • When "address_family" is set to "IPv6","ipv6_address" must be specified.
  • When "address_family" is set to "IPv6","ipv6_mask" must be specified.

Example

Create a logical Ethernet port.

admin:/>create logical_port eth name=lp001 eth_port_id=ENG0.A2.P2 address_family=IPv4 ipv4_address=10.178.1.133 ipv4_mask=255.255.0.0 failover_enabled=yes failback_mode=manually
Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 378619

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next