No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change snapshot capacity

change snapshot capacity


The change snapshot capacity command is used to modify the capacity of a snapshot.


change snapshot capacity { snapshot_id=? | snapshot_id_list=? } capacity=?






ID of a snapshot whose capacity you want to modify.

To obtain the value, run "show snapshot general".


Updated capacity of a snapshot.

The value is in the format of capacity value + unit, expressed in KB, MB, GB, TB, or Blocks.

  • The value ranges from 512 KB to 256 TB.
  • One block equals 512 bytes.
  • When the unit is GB or TB, a decimal number can be used.


ID list of snapshots that you want to modify their settings.

  • To obtain the value, run "show snapshot general".
  • You can specify multiple snapshot IDs separated by commas (,),or range separated by hyphens (-), such as:0,5-8.



Usage Guidelines

  • Before running this command, ensure that the selected snapshot is exactly the one whose capacity you want to modify.
  • Before running this command, clean up the cache of the application server that has mappings to the selected snapshot.


Change the capacity of snapshot "10" to "300 MB".

admin:/>change snapshot capacity snapshot_id=10 capacity=300MB  
CAUTION: You are about to perform a snapshot expansion. This operation expands the capacity of the snapshot. When a timing snapshot is used, it is converted to a common snapshot. 
Suggestion: Rescan for the snapshot on the server after the capacity expansion.  
Do you wish to continue?(y/n)y  
Change snapshot 10 successfully.

System Response


Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 331439

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next