No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add quorum_server_link general

add quorum_server_link general

Function

The add quorum_server_link general command is used to add a link between the disk array and a quorum server.

Format

add quorum_server_link general server_id=? [ local_controller=? ] local_port_id=? server_ip=?

Parameters

Parameter

Description

Value

server_id=?

ID of the quorum server.

Run the "show quorum_server general" command to obtain the value.

local_controller=?

ID of the local controller.

The value is in the format of "XA", "XB", "XC" or "XD", where the "X" is an integer such as 0, 1.

local_port_id=?

ID of the controller port.

Run the "show port general" command to obtain the value. The value contains 1 to 31 characters, including letters, digits, and periods (.). The value cannot start with a digit or a period (.), or end with a period (.).

server_ip=?

IP address of the quorum server.

Run the "show quorum_server general" command to obtain the value.

Level

Administrator

Usage Guidelines

None

Example

Add a link between quorum server 1 whose IP address is "192.168.0.25" and the disk array, where the controller ID is 0B, and the local port is ENG0.A4.P0.

admin:/>add quorum_server_link general server_id=1 local_controller=0B local_port_id=ENG0.A4.P0 server_ip=192.168.0.25 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181601

Views: 311960

Downloads: 39

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next