No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change domain monitor

change domain monitor

Function

The change domain monitor command is used to enable or disable the monitoring function for the external domain controller of the vStore and configure the monitoring period when the function is enabled.

Format

change domain monitor domaintype=? { interval=? | enable=? }

Parameters

Parameter

Description

Value

domaintype=?

Type of the domain controller.

The value can be "DNS", "AD", "LDAP", and "NIS", where:

  • "DNS": enables or disables the monitoring function and configures the monitoring period when the function is enabled for the DNS server.
  • "AD": enables or disables the monitoring function and configures the monitoring period when the function is enabled for the AD server.
  • "LDAP": enables or disables the monitoring function and configures the monitoring period when the function is enabled for the LDAP server.
  • "NIS": enables or disables the monitoring function and configures the monitoring period when the function is enabled for the NIS server.

interval=?

Monitoring period.

The value is an integer ranging from 5 to 300.

enable=?

Whether to monitor the domain controller.

The value can be "yes" or "no", where:

  • "yes": enables the monitor.
  • "no": disables the monitor.

Level

Administrator

Usage Guidelines

None

Example

Enable the function that monitors the AD domain controller and set the monitoring period to five seconds.

admin:/>change domain monitor domaintype=AD interval=5 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 321317

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next