No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show file package_result

show file package_result

Function

The show file package_result command is used to query the status of exporting.

Format

show file package_result file_type=? [ disk_id=? ] [ controller_id=? ]

Parameters

Parameter

Description

Value

file_type=? Type of the file to be exported.

The value can be "log", "all_log", "smart", "workload", "call_home", "isolated_disklog", "running_disklog", "diagnostic_file", or "pool_critical_log", where:

  • "log": logs.
  • "all_log": all logs of the system.
  • "smart": disk smart information.
  • "workload": workload (only supported by the storage array).
  • "call_home": Call Home data.
  • "isolated_disklog": isolated disk log information.
  • "running_disklog": running disk log information.
  • "diagnostic_file": diagnostic file.
  • "pool_critical_log": key logs of the pool.
disk_id Disk ID.

To obtain the value, run "show disk general" without parameters. This parameter can be specified only when "file_type" is set to "running_disklog".

controller_id Controller ID.

The value is in the format of "XA", "XB", "XC", or "XD", where "X" indicates an integer from 0 to 3, for example, "0A" or "1C". This parameter can be specified only when "file_type" is set to "running_disklog".

Level

Administrator

Usage Guidelines

None

Example

  • Check the log export status when the file type is "log".

    admin:/>show file package_result file_type=log
      Total Result  Controller ID  Single Result
      -------------  --------------  --------------
      Successful    0A        Successful
      --        0B        Successful
  • Check the Call Home data exporting status where the file type is "call_home".

    admin:/>show file package_result file_type=call_home
      Total Result  Controller ID  Single Result
      ------------  -------------  -------------
      Successful    0A             Successful
      --        0B             Successful
  • Check the log exporting status where the file type is "running_disklog".

    admin:/>show file package_result file_type=running_disklog disk_id=DAE010.5 controller_id=0A
      Total Result  Controller ID  Single Result  
      ------------  -------------  -------------  
      Successful      --       --
  • Check the log exporting status where the file type is "isolated_disklog".

    admin:/>show file package_result file_type=isolated_disklog 
      Total Result  Controller ID  Single Result  
      ------------  -------------  -------------  
      Successful     0A       Successful     
      --         0B       Successful     
      --         1A       Successful     
      --         1B       Successful
  • Check the diagnostic file exporting status where the file type is "diagnostic_file".

    admin:/>show file package_result file_type=diagnostic_file
      Total Result  Controller ID  Single Result  
      ------------  -------------  -------------  
      Successful      --       --

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Total Result

Overall result of exporting logs.

Controller ID

Controller ID.

Single Result

Overall result of exporting logs by a single controller.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 381227

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next