No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove logical_port ipv6_route

remove logical_port ipv6_route

Function

The remove logical_port ipv6_route command is used to remove the IPv6 route of a logical port.

Format

remove logical_port ipv6_route logical_port_name=? ipv6_address=?

Parameters

Parameter

Description

Value

logical_port_name=? Logical port name.

To obtain the value, run the "show logical_port route" command.

ipv6_address=? IPv6 address of the logical port.

To obtain the value, run the "show logical_port route" command.

Level

Administrator

Usage Guidelines

Before running this command, check that there is an IPv6 route on this logical port.

Example

Remove the IPv6 route from a logical port.

admin:/>remove logical_port ipv6_route logical_port_name=lif1 ipv6_address=2011::
DANGER: You are about to remove the route of the logical port.
This operation will interrupt the connection between the storage system and host.
Suggestion: Before you perform this operation, ensure that you have stopped the business on the route.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)
Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 381055

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next